SOAP DISPENSER, LIQUID 1.18L – SURFACE MOUNTED,STAINLESS STEEL
SPECIFICATION
Surface Mounted Horizontal Soap Dispenser shall hold and dispense up to 1.18 litres of liquid soaps. Soaps containing reportable salts, chlorides and alcohols should be avoided. Dispenser shall be fabricated of 20 gauge type 304 stainless steel, alloy 18-8. All exposed surfaces shall be satin finish. Valve shall be constructed of a plastic valve body and push button with stainless steel and plastic internal parts. A tamper resistant sight gauge shall be provided. Unit shall have a hinged stainless steel refill door on top of unit which is opened with special key provided.
INSTALLATION
Unit is surface mounted to wall or partition with a wall mounting plate (supplied) and screws (by others). Unit is se-cured to interlocking wedge bracket and locked in place by a locking screw (supplied) installed through hinged refill door. For mounting height standards refer to current Building Code of Australia for able bodied and/or disabled use.
OPERATION
Push button to dispense soap. Unit is refilled through hinged door at top requiring special key (supplied) to open. Soap tank will continue to feed properly until soap level is below valve intake port. Tank supply is replenished manually on cycle determined by maintenance needs.
ξ
